G704B-SR Speed Riveter
$3,150.00
Split version of the G704B with 3-foot hose. Power unit sits away from the structure for access in confined areas. NSN 5130-01-237-0488.
Description
The Cherry® G704B-SR is a split configuration of the G704B riveter fitted with a 3-foot hose. Separating the heavier power unit from the hand-held head lets the operator set the power unit on the floor, away from the structure — opening up access in space-constricted areas of the aircraft and easing the physical load across a shift.
The split design retains full CherryMAX® installation capability while substantially improving ergonomics in confined-access work. Straight, right-angle, and offset pulling heads are all supported.
Specifications
- Weight: 4.5 lbs (2.0 kg), power unit only
- Stroke: 0.518 in (13.2 mm)
- Pulling capacity: 3,136 lbs @ 90 psi (13.9 kN)
- Operating air pressure: 90–110 psi at inlet (6.2–7.6 bar)
- Air consumption: 4 CFM at 20 cycles per minute
- Noise level: Does not exceed 85 dB(A)
- Hose length: 3 feet
- Pulling heads: Straight, right angle, offset
- NSN: 5130-01-237-0488
Applications
Confined-access airframe work, interior structural repair, and any application where a standard in-line riveter cannot physically fit.
Pulling heads are not supplied with the riveter and must be ordered separately. See the Brochure tab for full pulling-head selection tables.
Product Brochure
Download the full product brochure for the G704B-SR Speed Riveter — including specifications, features, and application details.
Download Brochure (PDF)Tool Manual
Operating and service instructions for G704B-SR. Opens in a new tab.
Download Manual (PDF)Need help with this tool? FSI is a factory-authorized repair center — see our repair services or call (707) 935-1170.
